| Home |
| Specifications |
| Water Repellents |
| Sealers |
| Cleaners |
| Degreasers |
| Catalysts/Absorbents |
| Surfactants |
| Project Photos |
| Material Safety Data |
| Product Data Sheets |
| Site Map |
WATER REPELLENTS - SOLVENT BASED TREATMENTS |
CP-250 Siloxane Water Repellent CP-250 is an economical, general purpose water repellent for use on vertical concrete, precast, adobe, brick, stone, ceramic tile, stucco, masonry and mortar to protect against water damage..
Product Data Sheet Material Safety Data Sheet Architectural Specification
CP-500 PREMIUM Penetrating Water Repellent CP-500 Premium is a spec grade heavy-duty clear, penetrating water repellent. containing a solution of siloxane(s) reduced in solvents. CP-500 Premium is a siloxane solution reduced in solvent for use on: concrete, precast, adobe, brick, stone, ceramic tile, stucco, masonry and mortar to protect against water damage. Can be used on both horizontal and vertical surfaces.
Product Data Sheet Material Safety Data Sheet Architectural Specification
SW-244 Siloxane Based Penetrating Water Repellent SW-244 is a DOT grade heavy-duty siloxane based clear, penetrating water repellent containing a high solution of siloxane reduced in solvents. For use on concrete structures such as. roads, bridges, parking garages.
Product Data Sheet Material Safety Data Sheet Architectural Specification
SW 244-20 C is an economical clear, penetrating silane water repellent. For use on exterior above-grade concrete (precasts, cast-in -place, CMU), brick masonry, and some natural stones from the damage caused by water penetration. Overspray is a non-issue as SW-244-20 C will not a leave a residue on non-porous materials such as glass, metal or other adjacent surfaces.
Product Data Sheet Material Safety Data Sheet Architectural Specification
SW-244-40 VOC Penetrating Water Repellent SW 244-40 VOC is a DOT grade clear, penetrating water repellent containing a 40% solution of silane reduced in alcohols. For use on exterior above-grade concrete (precasts, cast-in -place, CMU), brick masonry, and some natural stones. SW 244-40 VOC has been used successfully on many DOT highway and bridge projects as well as new commercial construction. SW 244-40 VOC contains <600 g/L VOC. Lower VOC formulations available upon request.
Product Data Sheet Material Safety Data Sheet Architectural Specification
SW-244-100 Penetrating Water Repellent SW-244-100 is a 100% active alkylakoxysilane, clear penetrating water repellent. It chemically reacts with the substrate to produce a long-lasting water repellent effect. SW-244-100 complies with all known regulations limiting the VOC content of architectural coatings and sealers. Contains <250 g/L VOC.
Product Data Sheet Material Safety Data Sheet Architectural Specification
STAINGUARD-50 is a clear, penetrating water, oil and graffiti resistant treatment for use on most natural stones, concrete, terra cotta tile, cast stone, paving, sandstone, limestone, brick and grout. Suitable for a wide variety of applications, including building facades, floors, walls, swimming pool surrounds, patios, garages, kitchens, and entertaining areas.
Product Data Sheet Material Safety Data Sheet Architectural Specification |