Blog

What is the best location to install a hydrogen sulfide solid adsorbent system in a biogas plant?

Monday, November 21, 2022

H2S and water are produced during anaerobic digestion, therefore, the gas leaving the digester would be water saturated and this would be the ideal location for an adsorbent such as SULFURTRAP ® EX. If the gas is treated downstream of the digester, after the water vapor is removed, then a dry gas adsorbent such as […]

What type of H2S adsorbent do I need for biogas purification?

Monday, November 21, 2022

There are different adsorption methods to remove H2S from biogas: solid media, biological scrubbing or chemical scrubbing. Selecting the appropriate one depends on parameters such as flowrate and H2S concentration. In general terms, fixed iron bed solid media, such as SULFURTRAP ® , are used for low flow rates and low H2S levels.

Why is H2S removed from biogas?

Monday, November 21, 2022

Hydrogen sulfide and water vapor will react during combustion forming corrosive sulfuric acid. Therefore, since a primary application of biogas is for use as a fuel that can be burned like natural gas, corrosive contaminants like H2S must be removed.

What sulfur contaminants are present in biogas?

Monday, November 21, 2022

Biogas produced by anaerobic digestion of organic raw material can be obtained using various feedstocks (dairy manure, food waste and municipal solid waste). Therefore the gas composition can vary depending on the source, leading to different sulfur contaminants such as hydrogen sulfide, mercaptans and sulfur dioxide.

Why is SULFURTRAP® EX better than other similar products?

Friday, November 5, 2021

SULFURTRAP® EX is unique in its category not only due to the high purity and non-hazardous nature of the raw materials used in its production, but also due to its high flexibility or broad range of usage.

Will Aqua-Cleen® work well in metal surface cleaning formulations?

Friday, November 5, 2021

Yes, Aqua-Cleen® is ideal for this purpose as it is non-corrosive to base metal. It can act as a tarnish-removing component for alkaline copper and brass cleaners and is effective in wide pH ranges. Aqua-Cleen® cleans metal to a bright, shiny, water break free surface.

How do you dispose of used SULFURTRAP EX®?

Thursday, October 28, 2021

Due to its general non-hazardous characteristic, SULFURTRAP® EX can be disposed of in landfills following local and state regulations and should be qualified appropriately before final disposal. More details can be found in the SULFURTRAP® EX PDS and SDS.

Is SULFURTRAP EX® classified as hazardous?

Thursday, October 28, 2021

No. SULFURTRAP EX prior to use iis classified as non-hazardous. The spent reagent is also generally considered non-hazardous. More details can be found in the SULFURTRAP® EX PDS and SDS.

Does SULFURTRAP EX need oxygen or water to work?

Thursday, October 28, 2021

No. SULFURTRAP® EX works across a broad range of process conditions from aerobic to anaerobic and from fully saturated to partial saturation to dry conditions.

Is SULFURTRAP EX® iron based?

Thursday, October 28, 2021

Yes. SULFURTRAP® EX is based upon patented, concentrated iron oxide based chemistry.

HOW CAN WE HELP?

Have a question? Need a quote? Our technical staff is here to help you identify the right solution for your project requirements.